With only two DOMINO routed holes and one drilled hole, the corner joint is produced quickly and without additional measurements.
The center panel joint is produced in the same way as a corner joint. The only difference is that a through hole is made in the center panel with the DOMINO jointer DF 500. The connector is inserted through this hole and the bases of the two structures can then be attached in the usual way.
The new DOMINO basic structure connectors enable a flexible connection between a series of 32 holes and the base of a structure. The fixture is turned directly into the 5 mm hole in the series of holes and anchored in the base of the structure using a DOMINO routed hole. For simple, fast, and precise work.
{Die neuen DOMINO Korpus- und Möbelverbinder sind einfach und universell positionierbar - in der Kombination mit DOMINO Dübel oder einer Lochreihe.}
{Das stabile und dennoch lösbare DOMINO Verbindungssystem ermöglicht aufgrund seines großen Toleranzausgleichs sowie seiner hohen Standsicherheit einen reibungslosen Auf- und Abbau des Möbelstücks - sowohl in der Werkstatt als auch beim Kunden.}
{Alle Verbindungen sind wie gewohnt mit der Dübelfräse DOMINO DF 500 einfach und schnell zu verarbeiten - ohne zusätzliche Spezialmaschine.}

The new DOMINO basic structure connectors and furniture connectors can be positioned simply and universally – in combination with DOMINO or a series of holes.
Because of its high tolerance compensation and high stability, the detachable DOMINO jointing system enables seamless assembly and disassembly of a piece of furniture – in the workshop as well as with the customer.
All joints are simple and quick to machine using the DOMINO DF 500 joiner. No additional special machine is required.
The connectors' large tightening distance and long bolts make furniture assembly significantly easier. Cupboard assembly is therefore no problem, and you can do it easily on your own.
Routing and cutting tolerances of up to 1.4 mm are compensated for without problems by the fixture.
The clever DOMINO system enables very simple and precise positioning of joints, thereby rendering additional stops and positioning aids unnecessary. For working efficiently and quickly.

Joint fixture (8 mm DOMINO dowel cross-cuts) D8
Plate thickness 3/4 - 1-1/8" (18 - 28 mm)
DOMINO routing depth for side part 5/8" (15.00 mm)
DOMINO routing depth for base part 1-1/8" (28.00 mm)
Drilling diameter in base part 5/8" (15.00 mm)

50 x Split anchor, 50 x Bolt with M4 thread, 50 x Plastic trays, 50 x Cross anchor with threaded pin

Manufacturer	Festool
SKU	203166
EAN / UPC	4014549302736
Quantity in Pack	50
Product Type	Consumable
Country of Origin	DE
Product Group	Joining – DOMINO joining system/Accessories for joining machine DF 500/Connector for DOMINO DF 500 joining machine
Customs Tariff Number	830242