Aerosmith SAH584140 Sleeve Exp Anchor Hex Zin 5/8" x 4-1/4" (10/pack)

AEROSMITH SAH584140 Carbon Steel Sleeve Anchor 5/8 in. x 4-1/4 in. Hex Head

The Aerosmith Sleeve Anchor Carbon Steel is an all-steel, pre-assembled heavy-duty mechanical anchor designed for fastening into a variety of solid base materials, including concrete and masonry. The SAH584140 is a 5/8 in. x 4-1/4 in. hex-head configuration with zinc-plated carbon-steel components. Its pre-assembled design allows the anchor to be installed directly through the fixture, and the anchor diameter matches the required drill-hole diameter for straightforward installation.

Applications

• Light- to medium-duty signage
• Electrical boxes
• Shelving
• Junction boxes
• Door frames
• Window frames

Features & Benefits

• All-steel component design
• Pre-assembled anchor for quick installation
• Heavy-duty mechanical anchoring design
• Can be used in a variety of solid base materials
• Anchor size is the same as the required hole size
• Hex-head configuration for wrench or socket installation
• Zinc-plated carbon-steel construction
• Aerosmith Sleeve Anchors are also available in acorn-nut and flat-head styles

Base Materials

• Concrete
• Grout-filled masonry
• Block — expansion must occur in the solid portion
• Brick
• Stone

Anchor Component Materials

• Body: Zinc-plated carbon steel
• Nut & Washer: Carbon steel
• Expansion Sleeve: Carbon steel

Installation

1. Drill a 5/8 in. diameter hole in the base material.
2. Insert the pre-assembled anchor through the fixture and into the drilled hole.
3. Seat the anchor so the washer and nut are positioned against the fixture.
4. Tighten the hex nut to the required torque; the manufacturer lists a maximum torque of 50 ft-lb for SAH584140.

Specifications

• Part ID: SAH584140
• Product: Carbon Steel Sleeve Anchor
• Head Style: Hex Head
• Size: 5/8 in. x 4-1/4 in.
• Length: 4-1/4 in.
• Anchor Diameter: 5/8 in.
• ANSI Drill Diameter: 5/8 in.
• Minimum Embedment Depth: 2 in.
• Maximum Torque: 50 ft-lb
• Box Quantity: 10
• Carton Quantity: 60

Hex-Head Anchor Dimensions

• ANSI Carbide Drill Bit: 5/8 in.
• Fixture Clearance Hole: 11/16 in.
• Inner Bolt Size: 1/2-13
• Nut Height: 7/16 in.
• Wrench / Socket Size: 3/4 in.
• Washer O.D.: 1-3/8 in.

Published Performance Data

For a 5/8 in. sleeve anchor installed at 2 in. minimum embedment in 4,000 psi normal-weight, uncracked concrete, Aerosmith publishes an ultimate tension capacity of 4,560 lb and an ultimate shear capacity of 7,154 lb. Using the manufacturer's minimum safety factor of 4.0, the corresponding published allowable capacities are 1,140 lb tension and 1,788 lb shear. The listed carbon-sleeve-anchor torque for this configuration is 50 ft-lb.

Grout-Filled Block (CMU) Performance

For a 5/8 in. sleeve anchor at 2 in. embedment in grout-filled CMU, Aerosmith publishes ultimate loads of 1,600 lb tension and 2,200 lb shear at 2,000 psi CMU, and 1,946 lb tension and 2,200 lb shear at 3,000 psi CMU. Manufacturer notes require appropriate safety factors and recommend job-site testing where needed to verify base-material and anchor performance.

Technical Notes

• Published normal-weight concrete values are for anchors installed in uncracked concrete.
• The concrete or CMU must meet the specified minimum compressive strength at the time of installation.
• Ultimate concrete load capacities must be reduced by a minimum safety factor of 4.0 to determine allowable loads.
• A safety factor of 10 or higher may be necessary depending on the application, including life-safety or overhead conditions.
• Always evaluate actual base material, edge distance, spacing, fixture conditions and applicable code requirements for the installation.

Aerosmith Sleeve Anchor Performance Data PDF