Festool - 495315 - Multifunction Table MFT/3

Festool - 495315 - Multifunction Table MFT/3

Product Highlights

• {Flexibler als auf jeder Werkbank können Werkstücke unterschiedlichster Form und Größe sicher fixiert und bearbeitet werden.}
• {Die Arbeitshöhe von 90 cm für rückenschonendes Arbeiten. Dazu ganz einfach klappbar für platzsparenden Transport.}
• {Vielseitig kombinierbar mit Führungsschiene, Kombi-Schmiege und über den Tisch TSB/1-MW 1000 als Erweiterung der Arbeitsfläche.}

Features and Benefits

• Can easily be carried to a jobsite, due to its compact size and light weight.
• Accurate and repeatable cuts with the guide rail and plunge saw or routers.
• Clamp faster with uniform holes and Festool clamps.
• Use with legs folded out, at full height, or folded in and set on the floor.

Product Details

Guide Rail system: The integrated guide rail system allows you to cut with confidence. Adjustable to a maximum cutting depth of three inches, accurately cut materials over 27 inches in width - a feat which is impossible with the largest of miter saws. Combined with Festool TS Series saws, Trion jigsaws and OF Series routers, the guide rail is used to make precise, splinter-free cuts that are safer than with a conventional table or radial arm saw.

Angle Unit: The angle unit supplied with the MFT3 Multi-Function Table attaches using the V-Groove side rail enabling easy removal and quick, accurate reattachment. Using the angle units detents, make precise angle cuts at common angles. Changing the cut angle is much easier when compared to a miter saw where the entire saw head must be repositioned. The angle stop allows the guide rail and saw to remain stationary while repositioning the workpiece and fence.

Angle Stop: Precise, repeatable angle cuts. The angle stop, which is attached to the Multi-Function Table using the V-Groove side rail, prevents movement of the angle unit by stabilizing the end of the fence. It can be easily removed or repositioned using the locking knob.

Ergonomics: Not even the placement of the tensioning knobs for the legs of the MFT escaped consideration in the redesign of the MFT3 Multi-Function Table. The knobs are now placed further from the side of the MFT to provide ample room for rotating the knob without damaging your most valuable tools -- your hands.

Rubber Feet: Even the most minute of details have not been overlooked in the redesign of the new MFT3 Multi-Function Table. The new rubber foot caps protect the floor which is especially important while working on the job site. The new caps also make the MFT more resistant to lateral movement during use.

Combining Tables: Festool's system approach to tool design is exemplified in the use of the integrated T-Groove side rail to quickly and easily connect two or more Multi-Function Tables (MFTs) to one another. Simply insert the optional connectors (484 455) into the side rails to bridge the MFTs to one another multiplying your work surface. It's that simple!

Clamping: The perforated work surface and integrated side rails of the Multi-Function Table provide a wide variety of clamping configurations. Working with the edge of the workpiece or irregular shapes has never been easier thanks to Festool's clamps which are designed to integrate with the MFT. Work with confidence, knowing that your workpiece is well secured.

Work Surface: While the Multi-Function Table (MFT) makes a superb work surface for cutting, sanding and routing, you can also use the MFT for assembly. Built to be sturdy, the MFT can support loads up to 260 lbs. A ergonomically designed work height places your work materials at the perfect height.

Threaded Insert: A new feature of the totally redesigned MFT3 Multi-Function Table is the use of threaded inserts for attaching the perforated work surface. Previous models of the MFT used a coarse wood screw for attachment. The new threaded inserts not only prevent damage to the MDF top from over torquing but also establish a reference point when attaching the top. Positioning the top is now easier and more accurate than ever.

Angle Unit & Fence Positioning: The Multi-Function Table has been recently redesigned to offer a more comfortable work surface height. Folding legs make transporting the MFT to and from job sites easy by providing a light weight, compact profile. For installing flooring and other applications where you spend time kneeling, the MFT can be placed at floor level with the legs collapsed bringing the work surface to you. Now that's smart!

Work Surface Height: With limitless options for securing material, the MFT/3 is your single best option for routing, sanding, clamping and assembly.

Limitless versatility: Uniform hole pattern provides the basis for secure clamping, so you spend less time trying to get a grip on tricky workpieces.

Grid-hole pattern

Specifications

• Transport weight incl. accessories 33.9 kg
• Table height, legs folded away 7" (180.00 mm)
• Load capacity 264.56 lbs (120.00 kg)
• Weight 61.73 lbs (28.00 kg)
• Max. workpiece width 27" (700.00 mm)
• Table dimensions 45" (1157 mm) x 30" (773 mm)
• Max. workpiece thickness 3-5/64" (78.00 mm)
• Table height, legs unfolded 35" (900.00 mm)

Included in Delivery

• table with perforated top and foldaway legs, swivel unit, support unit, CMS Router Table Miter Gauge, adjustable stop, 42" Guide Rail FS 1080, guide rail deflector, additional clamp

Product Information

Packaging

• Length: 48.43 in
• Width: 33.39 in
• Height: 10.04 in
• Packaged weight: 74.737 lb
• Package volume (calculated from dimensions): 16235.46 cubic inches

Additional Manufacturer Details

• Catalog description: MULTIF. TABLE MFT/3

Compatible Accessories (SKU References)

• 488030
• 577132
• 489570
• 577131
• 489571
• 491504
• 491594
• 484455
• 495502
• 495541
• 495542
• 203457